top of page

Memorial Day Sale!

Save 10%

on VR-5050 machines

Sale ends 5/31/2019, Not applicable with other offers.

VR-5050

 Industrial Strength CNC Router

Ready to cut:
​
$9,905.00

Description:

The VR-5050 is part of our industrial grade VR-Series CNC router line. With a travel of 53”x53” the VR-5050 makes it easy to cut 4’x4’ sheets of material, and with a little more fixture work you can cut 4’x8’ sheets as well.

 

VR-Series routers are manufactured with an aluminum extrusion frame, and all major parts are machined from 6061-T6 grade aluminum which keeps the machine light in weight while maintaining an extremely rigid structure. The X and dual drive Y-Axis have re-circulating bearings that travel along supported linear rails which allows the machine to be equipped with heavier industrial spindles. The Z-Axis on a VR-Series machine is our very own ZA800QR unit which has 8” of travel to complement the 6” Z height clearance of the machine. The X,Y and Z axis on a VR-Series unit are equipped with a acme leadscrew and anti-backlash nut drive mechanism. Overall a VR-Series router is the most rigid and cost effective machine on the market. Read our testimonials here.

 

Please call us for current build time. (714) 639-3639

VELOX CNC Router - 4x4

VELOX CNC Router - 4x4

VELOX CNC Router - 4x4 Side

VELOX CNC Router - 4x4 Side

veloxcnc-vr-5050-router_nema-34.jpg

veloxcnc-vr-5050-router_nema-34.jpg

VR3636

VR3636

VELOX_14W

VELOX_14W

White VR5050

White VR5050

Table Top

Table Top

VR3636 wiht Table

VR3636 wiht Table

VR5050 cutting 4x8

VR5050 cutting 4x8

ArtcamExpress V Carving

ArtcamExpress V Carving

VR3625

VR3625

Side of the VR Series

Side of the VR Series

Edited Image 2016-04-21 23-37-09

Edited Image 2016-04-21 23-37-09

Front VR3636

Front VR3636

Brian Pape Skins

Brian Pape Skins

Cable Carriers

Cable Carriers

Brian Pape Ethan Sign

Brian Pape Ethan Sign

Brian Pape Setup

Brian Pape Setup

Brian Pape Bend Ornament

Brian Pape Bend Ornament

Red Clamps

Red Clamps

VELOX Al Cut Sample

VELOX Al Cut Sample

Dust Collection

Dust Collection

VR-5050

VR-5050

Edited Image 2016-04-21 23-37-01

Edited Image 2016-04-21 23-37-01

WoodCraft OC - VR3636

WoodCraft OC - VR3636

Ready to Run

Ready to Run

3D STEP

VR-5050

Configuration: Econ

Starts at
$8,300

VR-5050 Econ Configuration Includes:

  • VR-5050 Fully Assembled and Tested in CA, USA

  • 4-Axis Smooth Step Ethernet Control Box - Built in Spindle Relay for On/Off Control

  • Make your own Table Top.

  • 3.5Hp 15A Porter Cable 7518 Router (With Router Mount)

  • Dust Hood for PC7518 Router

  • 1/2 Precision Collet Kit

  • Quick Manual Tool Change Kit

  • 3D Tapered Cutting Bit (2 Pack - 0.0625")

  • Amana Straight Plunge Router Bits (3 Pack - 1/2", 1/4", 1/8")

  • Hold Down Clamps (4 Pack)

  • New/Full Computer Set-Up (Desktop or Lap Top)

  • Mach 3 Control Software - Installed, Configured and Tested on PC

  • Vectrics Cut2D Pro - CAD/CAM Software - 2D Capable (+2hrs Training)

  • Home Switches on All Axis - Home Zeroed Saves all Part(Fixture) Zeros

  • Nema-34 960oz/in Stepper Motors on X, and Dual Drive Y-Axis

  • Nema-23 400oz/in Stepper Motor on Z-Axis

  • Cable Management on All Axis

  • 1 Year Limited Warranty on Defective Parts and Craftsmanship

* Shipping and Crate charges not Included - These Prices Vary

Machine Specifications:

Machine Travel (X,Y,Z): 51"x51"x8" (Router config.)

Part Clearance: 60"x6" (Top of primary MDF)

Overall Foot Print: 69"x80"x33" 

Rapid Speeds(X,Y,Z): 100, 100, 100 ipm

Cut Speeds(X,Y,Z) .500" deep, 1/2 Bit: 100, 100, 100 ipm

Resolution (X,Y, Z): 0.00025" , 0.00025" , 0.00035"

Repeatability : 0.001" (+/-)

Drive Mechanism: Leadscrew,anti-backlash Nut X, Y & Z. 

Weight: Est. 350 lbs

Shipping: Flat bed truck, Customer supply the forklift.

VR-5050

Configuration: Table, Spindle

Starts at
$11,500

Machine Specifications:

VR-5050 Econ Configuration Includes:

  • VR-5050 Fully Assembled and Tested in CA, USA

  • 4-Axis Smooth Step Ethernet Control Box - Built in Spindle Relay for On/Off Control

  • Aluminum Extruded T-Slot Table Top

  • 220V Italian Spindle, 18K make RPM.

  • Dust Hood for the Spindle

  • 1/2 Precision Collet Kit

  • Quick Manual Tool Change Kit

  • 3D Tapered Cutting Bit (2 Pack - 0.0625")

  • Amana Straight Plunge Router Bits (3 Pack - 1/2", 1/4", 1/8")

  • Hold Down Clamps (4 Pack)

  • New/Full Computer Set-Up (Desktop or Lap Top)

  • Mach 3 Control Software - Installed, Configured and Tested on PC

  • Vectrics Cut2D Pro - CAD/CAM Software - 2D Capable (+2hrs Training)

  • Home Switches on All Axis - Home Zeroed Saves all Part(Fixture) Zeros

  • Nema-34 960oz/in Stepper Motors on X, and Dual Drive Y-Axis

  • Nema-23 400oz/in Stepper Motor on Z-Axis

  • Cable Management on All Axis

  • 1 Year Limited Warranty on Defective Parts and Craftsmanship

* Shipping and Crate charges not Included - These Prices Vary

Machine Travel (X,Y,Z): 53"x53"x8" (Router config.)

Part Clearance: 60"x6" (Top of primary MDF)

Overall Foot Print: 69"x80"x33" 

Rapid Speeds(X,Y,Z): 100, 100, 100 ipm

Cut Speeds(X,Y,Z) .500" deep, 1/2 Bit: 100, 100, 100 ipm

Resolution (X,Y, Z): 0.00025" , 0.00025" , 0.00035"

Repeatability : 0.001" (+/-)

Drive Mechanism: Leadscrew,anti-backlash Nut X, Y & Z. 

Weight: Est. 350 lbs

Shipping: Flat bed truck, Customer supply the forklift.

VR-5050

Configuration: Welded Stand

Starts at
$15,700

Machine Specifications:

Ready to cut Features:

VR-5050 Econ Configuration Includes:

  • VR-5050 Fully Assembled and Tested in CA, USA

  • Welded computer station and welded leds/stand

  • 4-Axis Smooth Step Ethernet Control Box - Built in Spindle Relay for On/Off Control

  • Aluminum Extruded T-Slot Table Top

  • 220V Italian Spindle

  • Dust Hood for the Spindle

  • 1/2 Precision Collet Kit

  • Quick Manual Tool Change Kit

  • 3D Tapered Cutting Bit (2 Pack - 0.0625")

  • Amana Straight Plunge Router Bits (3 Pack - 1/2", 1/4", 1/8")

  • Hold Down Clamps (4 Pack)

  • New/Full Computer Set-Up (Desktop or Lap Top)

  • Mach 3 Control Software - Installed, Configured and Tested on PC

  • Vectrics Cut2D Pro - CAD/CAM Software - 2D Capable (+2hrs Training)

  • Home Switches on All Axis - Home Zeroed Saves all Part(Fixture) Zeros

  • Nema-34 960oz/in Stepper Motors on X, and Dual Drive Y-Axis

  • Nema-23 400oz/in Stepper Motor on Z-Axis

  • Cable Management on All Axis

  • 1 Year Limited Warranty on Defective Parts and Craftsmanship

* Shipping and Crate charges not Included - These Prices Vary

Machine Travel (X,Y,Z): 53"x53"x8" (Router config.)

Part Clearance: 60"x6" (Top of primary MDF)

Overall Foot Print: 69"x80"x33" 

Rapid Speeds(X,Y,Z): 100, 100, 100 ipm

Cut Speeds(X,Y,Z) .500" deep, 1/2 Bit: 100, 100, 100 ipm

Resolution (X,Y, Z): 0.00025" , 0.00025" , 0.00035"

Repeatability : 0.001" (+/-)

Drive Mechanism: Leadscrew,anti-backlash Nut X, Y & Z. 

Weight: Est. 350 lbs

Shipping: Flat bed truck, Customer supply the forklift.

Why buy a VELOX CNC machine?

  • VELOX senior staff has over 17 years of cnc router experience to help provide the solution.

  • Great customer training using join.me or one on one training at our VELOX CNC location.

  • Reliable machines

  • Patience to train beginner customers

  • Experience to train advanced customers

  • We design our machines in-house using high end solidworks with the most current release.

  • When you talking to sales, you also are talking to a CAD designer, CAM programer, and Machine operator.

  • We build the machines in California.

  • We do not import our machines from an outside machine maker.

  • We use reliable parts that are readily available for our machines.

  • Our ready to cut machine combo takes minimal amount of time to connect, plug in and cut.

  • Our machines have modular and easy to ship electronics and parts for easy maintenance.

  • The VR5050 desktop version can fit through a standard door when installing.

  • US Fortune 500 company, US military choice, and  Ivy League College choice.

  • Easy to use software packages.

  • Brushless bulletproof high torque stepper motors.

  • Brushless encoder hybrid high torque stepper motors as an upgrade.

  • Uses standard G-code. You can grow with G-code and program machines priced over $100,000 with G-code.

  • Fully dedicated computer with large toolpath display.

  • Fixture offset for multiple parts to be remade with repeatability.

Machine Specs, Options, and Upgrades:

Electric Input: 

  Computer: 115 - 220V -- *Separate this from the router.

  Control Box: 115 - 220V -- *Separate this from the router.

  Router: 115 - 200V -- *Separate this from the computer.

  HSD: 220V , Single or 3 Phase, Upgrade in motors and drivers may be required.

  PDS: 220V , Single or 3 Phase, Upgrade in motors and drivers may be

  Tekno: 220V , Single or 3 Phase, Upgrade in motors and drivers may be

               required.

 

Control Software:

  Standard: Mach 3 with Smooth Stepper Ethernet

  Upgraded: Flash Cut Setting

 

Computer Specs for Mach 3:

  Please send in your computer for VELOX to install Mach 3

  •   Windows 10 - 64 bit

  •   4 Gigs of Ram

  •   250+ Gig hard drive

  •   17 Inch monitor

  • Ethernet plug for smooth step config. Call about our parallel port upgrade

 

Control Box:

  Standard: Mach 3 with Smooth Stepper w/Ethernet Connection

  Upgraded: Stepper with Encoders

 

XYZ Motors: undated 5/21/2018

  Standard: 4qty Nema 34 950 oz/inch Stepper Motors, Brushless.
      Can run 24 hours/Day. X, Y, and Z axis.

  Upgraded: Nema 23 with encoder or Nema 34 with encoder, Brushless

 

Motor Drivers:

  Standard: Leadshine Drivers

  Upgraded: Leadshine Hybrid Encoder Drivers

 

Standard Max Travel Speed/Feed Rate:

  X Axis: 100 IPM +-20 IPM Dependant on load/acceleration

  Y Axis: 100 IPM +-20 IPM Dependant on load/acceleration

  Z Axis: 100 IPM +-20 IPM Dependant on load/acceleration

 

Standard Mechanical:

  X-Axis: Lead screw, Resolution of 0.001"

  Y-Axis: Lead screw, Resolution of 0.001"

  Z-Axis: 16mm Diameter Ballscrew - 10mm pitch, Resolution of 0.00025"

  XYZ Cable Carriers: Cable Management on all axis.

 

Control Box Standard

  Relay #1: Onboard 115V-220V 15A Relay out (M3 g-code)  
  Optional Relay #1: Onboard 24V Relay out signal (M3 g-code)

  Optional Relay #2: Onboard 24V Relay out signal (M8 g-code)

 

Control Box Upgrade to 5th Drive - rotary rable ready

  Drivers: 5 Gecko Drives

  Smooth Step: 2nd breakout board installed.

  Relay #1: Onboard 115V-220V 15A Relay out (M3 g-code)  
  Relay #1: Onboard 24V Relay out signal (M3 g-code)

  Relay #2: Onboard 24V Relay out signal (M8 g-code)

 

Control Box Upgrade to Hybrid Stepper Controller

  Drivers: 4qty 6A capable Stepper Hybrid Drivers

  Ethernet: VELOX configures the computer

 

Control Box Upgrade to Hybrid Stepper Motors with Encoders

  Motors: 4qty Hybrid Stepper Motors  Benefits: Stepper motor runs cooler,

                 quieter, and stronger

  Ethernet: VELOX configures the computer or laptop

 

Add on and Options

  Welded Stand: Welded Steel Tube, Powder Coated Paint.

  Computer Station: Attached Computer Cabinet, Monitor Display

  Vacuum Table: Vacuum Table, Plumbed

  Vacuum Pump/Blower: Installation & Connection of Vacuum Pump

 

Accessories - Options

  Dust Hood: Vacuum up the dust and chips 4" hose fitting

  Precision Collet: Get high precision 0.0004" runout

  QMTC: Mach 3 remembers tool lenghts offsets after 1st calibration.

  Tool Zero Plate: Zero your tool with ease.

  Cold Airgun: Cut aluminum with less hassle or mess of coolants.

  Rotary Table: 4th axis indexing to make things like table legs and cues.

 

 

Velox cnc router machine 3x3

Our VELOX CNC machines are fully assembled, calibrated, tested, cut tested, and shipped on a pallet or in a crate. The aluminum extrusions are machined to tolerance on our cnc machines.

Velox cnc router machine 4x4

Nema 34 with 950 oz/in installed onto the X axis and Y dual axis.

Velox cnc router machine 3x3 - 2

A taller Z travel of 8 inches compiled with a 6 inch clearance allows for less or no manual router repositioning which translate to faster set time.

Velox cnc router machine 3x3 - 3

Thick .75" columns mounted on 1" solid aluminum bearing transition blocks provides a solid gantry design. 3/4 thick table top have t-slots for 1/4-20 hex bolt or hex nuts.

Velox cnc router machine 3x3 - 4

Solid Billet 6061 aluminum parts bolted onto precision extruded aluminum. The supported 16 mm shafts are installed under the table to avoid falling dust. Cable carriers keep wires nice and neat.

Velox cnc router machine 3x3 - 4

The VELOX CNC machines are now using the very stable ethernet connection from computer to our control box. The smoothstepper with ethernet connection also allows for more choices on the computers you can use. This will connect to Win 7 32 or 64 bit, laptops or desktop computers.

Guitar Inlay cutting on a VR-Series

It takes a very smooth and accurate machine to be able to use a 0.015" cutter. The VR Servies machines does the job very well! A Tekno Italian Spindle was used on the video above. Great for making guitar bodies, necks, and inlays.

Aluminum pocketing on a VR-Series

CNC Router model VR3636 Cutting aluminum 6061 0.050" step down, 500" deep pockets and .75" deep side walls. The machine is made of billet aluminum using 4 stepper motors driving 4 leadscrews. The cutting spindle is a Porter Cable 892.

Read more...

Plastic cutting on a VR-Series

Cutting plastic with 3x3 cnc router machine. VELOX CNC model VR3636. Feed rate of the roughing was set to 45 IPM at .250" depth of cut, 20K RPM, .500" diameter cutter, 2 flute end mill. The finish pass was at 20IPM. Read more...

Deep wood cutting on a VR-Series

VELOX CNC 36x36 machine cutting 2x4 material, 30 IPM, 1.3" Deep. 3.2 minutes, .500" Amana cutter. We used Mach 3 and VisualMill 2012.

Carbon fiber and Fiberglass plate cutting on a VR-Series

VELOX CNC router cutting through .0625" thick carbon fiber/fiber glass material. Using a custom size machine 74x14. This is similar to our 4x4 and 2x2 machines. Porter Cable Router and a VELOX CNC brass collet adapter .250" step down to .125". Air clamps were used for the hold down. Read more...

Dovetail cutting on a VR-Series

VELOX CNC cutting dovetails. The pattern was revised after 1 or 2 tries and the fit was great on the 3rd try. For anyone making dovetails, this machine would provide a great solution to making different styles of dovetails. VR3636 machines, Mach 3 control software, porter cable 892, precision collet, and a dovetail bit was used to cut pine.

Foam Cutting is an art combined with the right cnc router machine.

VELOX CNC router offers a grease fitting upgrade to help prevent foam from getting into the bearings. This will prevent downtime as you would have to do a machine maintenance if the machine was contaminated with foam. Ask about adding a grease fitting upgrade when buying a velox cnc machine.

Available software for machine sold by VELOX CNC. VELOX CNC machines works with all standard G-codes.

Vectics Cut 3D
+ Demo Downloadable

+ Art CAD and Cam

Vectics Cut 2D
+ Demo Downloadable
+ Art CAD and Cam

Vectics Vcarve Desktop
+ Demo Downloadable
+ Art CAD and Cam

Vectics Vcarve Pro
+ Demo Downloadable
+ Art CAD and Cam

Aspire
+ Demo Downloadable
+ Art CAD and Cam

VISUAL MILL
+ Demo Downloadable
+ CAD CAM

Rhino CAD - CAM
+ Demo Downloadable
+ Art CAD and CAM

Please call and speak to a VELOX rep for updated software listings.

Available software for machine sold by 3rd party.
VELOX CNC machines works with all standard G-codes.

Gibbs CAM
+ Parametric CAD
+ GibbsCAM will run on Mach 3

Click here for a reseller.

Solidworks
+ Parametric CAD
+ Solid CAM will run on MAch 3

Enroute
+ CAD - CAM
+ For the Cabinet and Sign industries

KCD
+ Cabinet Design 
+ CAD

Bob CAM
+ CAM
 

Master CAM
+ CAD
+ CAM

Please call and speak to a VELOX rep for updated software listings.

Velox cnc router machine 3x3 - 4

At Velox CNC, we strive to make quality parts in-house using high tech cnc machines. The majority of the aluminum is machined and assembled in-house in Orange California. The table top is custom extruded for VELOX CNC. Almost all of our parts have a .020" bevel to give it a superior look and feel.

5050_Price Config

Some of Our Customers

 

Johnson Controls
Lockheed Martin
Boeing
PPG
US Naval Research Laboratory
Integrated Medical Systems
Laser Tech
rockAbye
University of San Diego
University of Central Florida
University of Arizona
Hofstra University
University of Alabama
University of Michigan

Southeastern Lousisiana University

NJIT School of Architecture

Princeton University
Code Orange Robotics
Butler School
Sister High School
Vocational-High School
Fastenal
Build It Workspace
Carved
Woodbridge Glass
bottom of page