Save up to 15% on the 4x8 and 5x10

Power: 110V

Table Top: MDF

Cutting Head: 110V Router Manual

Retail: $22,000 

Sale Start Price at $18,000

Power: 220V

Table Top: Vacuum

Spindle: 4HP Manual Spindle

Retail: $25,500 

Sale Start Price at $21,500

Power:  220V

Table Top: Vacuum

Spindle:  5HP Auto tool Changer (8)

Retail: $38,000 

Sale Start Price at $32,000

Aluminum pocketing on our smaller VR-Series

CNC Router model VR3636 Cutting aluminum 6061 0.050" step down, 500" deep pockets and .75" deep side walls. The machine is made of billet aluminum using 4 stepper motors driving 4 leadscrews. The cutting spindle is a Porter Cable 892.

Carbon fiber and Fiberglass plate cutting on smaller VR-Series

VELOX CNC router cutting through .0625" thick carbon fiber/fiber glass material. Using a custom size machine 74x14. This is similar to our 4x4 and 2x2 machines. Porter Cable Router and a VELOX CNC brass collet adapter .250" step down to .125". 

Deep wood cutting on our smaller VR-Series

VELOX CNC 36x36 machine cutting 2x4 material, 30 IPM, 1.3" Deep. 3.2 minutes, .500" Amana cutter. We used Mach 3 and VisualMill 2012.

Plastic cutting on our smaller VR-Series

Cutting plastic with 3x3 cnc router machine. VELOX CNC model VR3636. Feed rate of the roughing was set to 45 IPM at .250" depth of cut, 20K RPM, .500" diameter cutter, 2 flute end mill. The finish pass was at 20IPM. Read more...

Foam Cutting is an art combined with the right cnc router machine cutting on our smaller VR-Series.

VELOX CNC router offers a grease fitting upgrade to help prevent foam from getting into the bearings. This will prevent downtime as you would have to do a machine maintenance if the machine was contaminated with foam. Ask about adding a grease fitting upgrade when buying a velox cnc machine.

Dovetail cutting on smaller VR-Series

VELOX CNC cutting dovetails. The pattern was revised after 1 or 2 tries and the fit was great on the 3rd try. For anyone making dovetails, this machine would provide a great solution to making different styles of dovetails. VR3636 machines, Mach 3 control software, porter cable 892, precision collet, and a dovetail bit was used to cut pine.

 

VR8

Configuration: Table, Router

$18,000

Starting Sale Price

+Tax, Shipping.

Spindle Configuration Includes:

  • VR8 (4X8) Design, Fully Assembled, and Tested in CA, USA

  • 4-Axis Flashcut CNC Control Box - Built in Spindle Relay for On/Off Control

  • MDF wooden table top.

  • 3.5 HP - Porter Cable Router

  • 1/2 Precision Collet Kit

  • Hold Down Clamps (4 Pack)

  • New/Full Computer Set-Up (Desktop)

  • Flashcut CNC Software - Installed, Configured and Tested on PC

  • Vectrics Cut2D Pro - CAD/CAM Software - 2D Capable (+2hrs Training)

  • Home Switches on All Axis - Home Zeroed Saves all Part(Fixture) Zeros

  • Smart Brushless Motors w/Ecoder - Nema 34 on X, and Dual Drive Y, Z Axis

  • Cable Management on All Axis

  • 1 Year Limited Warranty on Spindle, Bearings, Computer, Control Box Boards, Signal Generator, Defective Parts and Craftsmanship. Labor at VELOX CNC.

  • 2 Year Specific Limited Warranty on Driver, Motion Motors. Labor at VELOX CNC.

* Shipping and Crate charges not Included - These Prices Vary

Machine Specifications:

Machine Travel (X,Y,Z): 53"x98"x8" (Router config.)

Part Clearance: 60"x6" (Top of primary MDF)

Overall Foot Print: 69"x125"x33" 

Rapid Speeds(X,Y,Z): 900, 900, 200 ipm

Cut Speeds(X,Y,Z): 600, 600, 200 ipm

Resolution (X,Y, Z): 0.001" , 0.001" , 0.00035"

Repeatability : 0.003" (+/-)

Drive Mechanism: Rack and Pinion X & Y. Ballscrew on Z.

Weight: Est. 2000 lbs

Shipping: Flat bed truck, Customer supply the forklift.

Please call pricing and configurations:  (714) 639-3639

 

VR8

Configuration: Spindle, Table, Vacuum

Starting Sale Price

$21,500

+Tax, Shipping.

Machine Specifications:

Ready to cut Features:

Vacuum Configuration Includes:

  • VR8 (4X8) Fully Assembled and Tested in CA, USA

  • 4-Axis Flashcut CNC Control Box - Built in Spindle Relay for On/Off Control

  • MDF Table Top installed.

  • 3 HP - 7.5 HP Italian Spindle 18,000 or 24,000 RPM spindles.

  • 1/2 Precision Collet Kit

  • Vacuum Pump 2 HP to 11HP.

  • Amana Straight Plunge Router Bits (3 Pack - 1/2", 1/4", 1/8")

  • Hold Down Clamps (4 Pack)

  • New/Full Computer Set-Up (Desktop)

  • Mach 3 Control Software - Installed, Configured and Tested on PC

  • Vectrics Cut2D Pro - CAD/CAM Software - 2D Capable (+2hrs Training)

  • Home Switches on All Axis - Home Zeroed Saves all Part(Fixture) Zeros

  • Brushless Motors w/Ecoder - Nema 34 X, and Dual Drive Y, Z Axis

  • Cable Management on All Axis

  • 1 Year Limited Warranty on Spindle, Bearings, Computer, Control Box Boards, Signal Generator, Defective Parts and Craftsmanship. Labor at VELOX CNC.

  • 2 Year Specific Limited Warranty on Driver, Motion Motors. Labor at VELOX CNC.

* Shipping and Crate charges not Included - These Prices Vary

Machine Travel (X,Y,Z): 53"x98"x8" (Router config.)

Part Clearance: 60"x6" (Top of primary MDF)

Overall Foot Print: 69"x125"x33" 

Rapid Speeds(X,Y,Z): 900, 900, 200 ipm

Cut Speeds(X,Y,Z): 600, 600, 200 ipm

Resolution (X,Y, Z): 0.001" , 0.001" , 0.00035"

Repeatability : 0.003" (+/-)

Drive Mechanism: Rack and Pinion X & Y. Ballscrew on Z.

Weight: Est. 2000 lbs

Shipping: Flat bed truck, Customer supply the forklift.

Please call pricing and configurations:  (714) 639-3639

 

VR8

Configuration: ATC Spindle, Table Vacuum

Starting Sale Price

$32,000

+Tax, Shipping.

ATC Configuration Includes:

  • VR8 (4X8) Fully Assembled and Tested in CA, USA

  • Built in Spindle Relay for On/Off Control

  • 5Hp HSD Auto tool change spindle, 220V, Single or three Phase, Italian 

  • Delta VFD

  • Vacuum Table

  • 11HP Vacuum

  • Remote vacuum on/off control

  • 8 Tool Rack and holders. Upgradable to 16 tools

  • ER 32 Collects

  • Amana Straight Plunge Router Bits (3 Pack - 1/2", 1/4", 1/8")

  • Tool Holder Vise

  • Wired tool setter - Automatic

  • Wireless part height setter

  • Auto Dust Hood - Air Controlled

  • New/Full Computer Set-Up (Desktop and monitor)

  • Flashcut CNC machine control software.

  • Vectrics Cut 2D Pro - CAD/CAM Software - 2D Capable (+8hrs Training)

  • Brushless Motors with encoder Nema-34 Motors on X, and Dual Drive Y, Z Axis.

  • Cable Management on All Axis

  • 1 Year Limited Warranty on Spindle, Bearings, Computer, Control Box Boards, Signal Generator, Defective Parts and Craftsmanship. Labor at VELOX CNC.

  • 2 Year Specific Limited Warranty on Driver, Motion Motors. Labor at VELOX CNC.

  • * Shipping and Crate charges not Included - These Prices Vary

Machine Specifications:

Machine Travel (X,Y,Z): 53"x98"x8" (Router config.)

Part Clearance: 60"x6" (Top of primary MDF)

Overall Foot Print: 69"x125"x33" 

Rapid Speeds(X,Y,Z): 900, 900, 200 ipm

Cut Speeds Foam 2" deep, 1/2 Bit: 600, 600, 100 ipm

Cut Speeds Wood .500" deep, 1/2 Bit: 200, 200, 100 ipm

Resolution (X,Y, Z): 0.001" , 0.001" , 0.00035"

Repeatability : 0.003" (+/-)

Drive Mechanism: Rack and Pinion X & Y. Ballscrew on Z.

Weight: Est. 2000 lbs

Shipping: Enclosed Truck or a flat bed truck conestoga, Customer supply the forklift 72" Forks with 5,000 LBS capacity.

Please call pricing and configurations: 

(714) 639-3639 x1000

Why buy a VELOX CNC machine?

 
  • VELOX senior staff has over 17 years of cnc router experience to help provide the solution.

  • Great customer training using join.me or one on one training at our VELOX CNC location.

  • Reliable machines

  • Patience to train beginner customers

  • Experience to train advanced customers

  • We design our machines in-house using high end solidworks with the most current release.

  • When you talking to sales, you also are talking to a CAD designer, CAM programer, and Machine operator.

  • We build the machines in California.

  • We do not import our machines from an outside machine maker.

  • We use reliable parts that are readily available for our machines.

  • Our ready to cut machine combo takes minimal amount of time to connect, plug in and cut.

  • Our machines have modular and easy to ship electronics and parts for easy maintenance.

  • The VR5050 desktop version can fit through a standard door when installing.

  • US Fortune 500 company, US military choice, and  Ivy League College choice.

  • Easy to use software packages.

  • Brushless bulletproof high torque stepper motors.

  • Brushless encoder hybrid high torque stepper motors as an upgrade.

  • Uses standard G-code. You can grow with G-code and program machines priced over $100,000 with G-code.

  • Fully dedicated computer with large toolpath display.

  • Fixture offset for multiple parts to be remade with repeatability.

VELOX CNC vs Our Competitors

* These comparisons are the opinion of VELOX CNC based on our research, and knowledge. Please ensure that you conduct your own research in order to best determine the information needed.

Specifications

Rapid Travel

Cut Speed

Resolution

Repeatability

Drive Mechanism:

(X,Y,Z): 900, 900, 200 ipm

(X,Y,Z): 600, 600, 100 ipm

(X,Y,Z): 0.001" , 0.001" , 0.00035"

0.003" (+/-)

Helical Rack and Pinion X & Y. Ballscrew on Z.

Table Size

VR4

VR5

VR8

VR10

50x50

63x63

50x98

63x121

Foot Print

VR4

VR5

VR8

VR10

85x85

97x97

85x125

97x144

Electric Input: 

  Computer: 115 - 220V -- *Separate this from the router

  Control Box: 115 - 220V -- *Separate this from the router

  Router: 115 - 200V -- *Separate this from the computer

  HSD: 220V , Single or 3 Phase

  PDS: 220V , Single or 3 Phase

  PDS ATC: 220V , Single or 3 Phase

  Tekno: 220V , Single or 3 Phase

 

Control Software:

  Standard: Flashcut CNC

 

Computer Specs for Flash CUT CNC:

  •   Windows 10 - 64 bit used as a GUI - The Flashcut hardware sends out signal.

  •   8 Gigs of Ram

  •   250+ Gig hard drive

  •   19 Inch monitor

 

Control Box:

  Stepper with Encoders

  Flash Cut Signal Generator with USB

 

XYZ Motors: 

  Standard: 4qty Nema 34 Brushless High Toque with Encoders
      Can run 24 hours/Day. X, Y, and Z axis.

Motor Drivers:

  Leadshine Hybrid Encoder Drivers

Standard Mechanical:

  X-Axis: Helical Rack and Pinion, Resolution of 0.001"

  Y-Axis: Helical Rack and Pinion , Resolution of 0.001"

  Z-Axis: 16mm Diameter Ballscrew - 10mm pitch, Resolution of 0.00035"

  XYZ Cable Carriers: Cable Management on all axis.

 

Control Box Hybrid Stepper Controller

  Drivers: Brushless Drivers

  Signal Genterator: Flashcut CNC, Computer used a a GUI only.

 

Control Box ATC to Hybrid Stepper Motors with Encoders

  Motors: 4qty Hybrid Stepper Motors  Benefits: Stepper motor runs cooler,

                 quieter, and stronger

  Signal Genterator: Flashcut CNC

 

Add on and Options

  Vacuum Table: Vacuum Table, Plumbed

  Vacuum Pump/Blower: Installation & Connection of Vacuum Pump

 

Accessories - Options

  Dust Hood: Vacuum up the dust and chips 4" hose fitting

  Precision Collet: Get high precision 0.0004" runout

  QMTC: Mach 3 remembers tool lenghts offsets after 1st calibration.

  Tool Zero Plate: Zero your tool with ease.

  Cold Airgun: Cut aluminum with less hassle or mess of coolants.

  Rotary Table: 4th axis indexing to make things like table legs and cues.

 

 

Please call and speak to a VELOX rep for updated software listings.

Available software for machine sold by VELOX CNC. VELOX CNC machines works with all standard G-codes.

Vectics Cut 3D
+ Demo Downloadable

+ Art CAD and Cam

Vectics Cut 2D
+ Demo Downloadable

+ Art CAD and Cam

Vectics Vcarve Desktop
+ Demo Downloadable
+ Art CAD and Cam

Vectics Vcarve Pro
+ Demo Downloadable
+ Art CAD and Cam

Aspire
+ Demo Downloadable
+ Art CAD and Cam

VISUAL MILL
+ Demo Downloadable
+ CAD CAM

Rhino CAD - CAM
+ Demo Downloadable
+ Art CAD and CAM

Available software for machine sold by 3rd party.
VELOX CNC machines works with all standard G-codes.

Fusion 360

Gibbs CAM
+ Parametric CAD
+ GibbsCAM will run on Mach 3

Click here for a reseller.

Solidworks
+ Parametric CAD
+ Solid CAM will run on MAch 3

Enroute
+ CAD - CAM
+ For the Cabinet and Sign industries

KCD
+ Cabinet Design 
+ CAD

Bob CAM
+ CAM
 

Master CAM
+ CAD
+ CAM

VELOX CNC machine can run standard G-codes made with these software below.

Cabinet Vision

Cabinet Pro

KCD Software

Mozaik Software

and other software that will generate G-code.

 

Request an Official Quote:

Copyright © 2020 by VELOX CNC, LIBOON GROUP, INC.

  • Instagram Social Icon
  • Facebook Social Icon
  • YouTube Social  Icon