SALE!
10%
OFF
VR-2525x3.0
VR-2525
Industrial Strength CNC Router
Ready to cut:
$8,562.00
Description:
The VR-2525 is part of our industrial grade VR-Series CNC router line. With a travel of 28”x28” the VR-2525 makes it easy to Cut 2D composite or 3D wood reliefs with its compact but rigid design.
VR-Series routers are manufactured with an aluminum extrusion frame, and all major parts are machined from 6061-T6 grade aluminum which keeps the machine light in weight while maintaining an extremely rigid structure. The X and dual drive Y-Axis have re-circulating bearings that travel along supported linear rails which allows the machine to be equipped with heavier industrial spindles. The Z-Axis on a VR-Series machine is our very own ZA800QR unit which has 8” of travel to complement the 6” Z height clearance of the machine. The X,Y and Z axis on a VR-Series unit are equipped with a acme leadscrew and anti-backlash nut drive mechanism. Overall a VR-Series router is the most rigid and cost effective machine on the market. Read our testimonials here.
Please call us for current build time. (714) 639-3639
3D STEP
Ready to cut Features:
VR-2525 Ready to Cut Configuration Includes:
-
VR-2525 Fully Assembled and Tested in CA, USA
-
4-Axis Smooth Step Ethernet Control Box - Built in Spindle Relay for On/Off Control
-
Aluminum Extruded T-Slot Table Top
-
3.5Hp 15A Porter Cable 7518 Router (With Router Mount)
-
Dust Hood for PC7518 Router
-
1/2 Precision Collet Kit
-
Quick Manual Tool Change Kit
-
3D Tapered Cutting Bit (2 Pack - 0.0625")
-
Amana Straight Plunge Router Bits (3 Pack - 1/2", 1/4", 1/8")
-
Hold Down Clamps (4 Pack)
-
New/Full Computer Set-Up (Desktop or Lap Top)
-
Mach 3 Control Software - Installed, Configured and Tested on PC
-
Vectrics Cut2D Pro - CAD/CAM Software - 2D Capable (+2hrs Training)
-
Home Switches on All Axis - Home Zeroed Saves all Part(Fixture) Zeros
-
Nema-23 400oz/in Stepper Motors on X, and Dual Drive Y-Axis
-
Nema-23 400oz/in Stepper Motor on Z-Axis
-
Cable Management on All Axis
-
1 Year Limited Warranty on Defective Parts and Craftsmanship
* Shipping and Crate charges not Included - These Prices Vary
Machine Specs, Options, and Upgrades:
Electric Input:
Computer: 115 - 220V -- *Separate this from the router.
Control Box: 115 - 220V -- *Separate this from the router.
Router: 115 - 200V -- *Separate this from the computer.
HSD: 220V , Single or 3 Phase, Upgrade in motors and drivers may be required.
Tekno: 220V , Single or 3 Phase, Upgrade in motors and drivers may be
required.
Control Software:
Standard: Mach 3 with Smooth Stepper w/Ethernet Connection
Optional: Mach 3 with Parallel Port
Upgraded: Flash Cut Setting
Computer Specs for Mach 3:
Please send in your computer for VELOX to install Mach 3
-
Windows 7 - 32 bit
-
2 Gigs of Ram
-
40 Gig hard drive
-
17 Inch monitor
-
Ethernet plug for smooth step config. Call about our parallel port upgrade
Control Box:
Standard: Mach 3 with Smooth Step Ethernet
Upgraded: Mach 3 with Parallel Port
Upgraded: Flash Cut Signal Generator with USB
XYZ Motors:
Standard: 4qty Nema 23 Stepper Motors, Brushless. Can run 24 hours/Day
Upgraded: Nema 23 with encoder or Nema 34 with encoder, Brushless
Motor Drivers:
Standard: Leadshine Drivers
Upgraded: Gecko G203 Drivers
Upgraded: Leadshine Hybrid Encoder Drivers
Standard Max Travel Speed/Feed Rate:
X Axis: 100 IPM +-20 IPM Dependant on load/acceleration
Y Axis: 100 IPM +-20 IPM Dependant on load/acceleration
Z Axis: 75 IPM +-20 IPM Dependant on load/acceleration
Standard Mechanical:
X-Axis: 5/8 Diameter - .250 per turn, Resolution of 0.00035"
Y-Axis: 5/8 Diameter - .250 per turn , Resolution of 0.00035"
Z-Axis: 1/2 Diameter - .100 per turn, Resolution of 0.00025"
XYZ Cable Carriers: Cable Management on all axis.
XYZ Gear Ratio: All Axis are Direct Drive - anti-backlash couplers.
Mechanical Upgraded Option
X Axis: 5/8 Diameter - .500 per turn, Resolution of 0.00045"
Y Axis: 5/8 Diameter - .500 per turn, Resolution of 0.00045"
Z Axis: 1/2 Diameter - .200 per turn, Resolution of 0.00025"
Upgraded Max Travel Speed/Feed Rate (with upgraded motors):
X Axis: 180 IPM +-20 IPM Dependant on load/acceleration
Y Axis: 180 IPM +-20 IPM Dependant on load/acceleration
Z Axis: 150 IPM +-20 IPM Dependant on load/acceleration
Control Box Standard
Relay #1: Onboard 115V-220V 15A Relay out (M3 g-code)
Relay #1: Onboard 24V Relay out signal (M3 g-code)
Relay #2: Onboard 24V Relay out signal (M8 g-code)
Control Box Upgrade to 5th Drive - rotary rable ready
Drivers: 5 Gecko Drives
Smooth Step: 2nd breakout board installed.
Relay #1: Onboard 115V-220V 15A Relay out (M3 g-code)
Relay #1: Onboard 24V Relay out signal (M3 g-code)
Relay #2: Onboard 24V Relay out signal (M8 g-code)
Control Box Upgrade to Hybrid Stepper Controller
Drivers: 4qty 6A capable Stepper Hybrid Drivers
Ethernet: VELOX configures the computer or laptop
Control Box Upgrade to Hybrid Stepper Motors with Encoders
Motors: 4qty Hybrid Stepper Motors Benefits: Stepper motor runs cooler,
quieter, and stronger
Ethernet: VELOX configures the computer or laptop
Add on and Options
Welded Stand: Welded Steel Tube, Powder Coated Paint.
Computer Station: Attached Computer Cabinet, Monitor Display
Vacuum Table: Vacuum Table, Plumbed
Vacuum Pump/Blower: Installation & Connection of Vacuum Pump
Accessories - Options
Dust Hood: Vacuum up the dust and chips 4" hose fitting
Precision Collet: Get high precision 0.0004" runout
QMTC: Mach 3 remembers tool lengths offsets after 1st calibration.
Tool Zero Plate: Zero your tool with ease.
Cold Airgun: Cut aluminum with less hassel or mess of coolants.
Rotary Table: 4th axis indexing to make things like table legs and cues.
Our VELOX CNC machines are fully assembled, calibrated, tested, cut tested, and shipped on a pallet or in a crate. The aluminum extrusions are machined to tolerance on our cnc machines.
A taller Z travel of 8 inches compiled with a 6 inch clearance allows for less or no manual router repositioning which translate to faster set time.
Machine Specifications:
Machine Travel (X,Y,Z): 26"x26"x8" (Router config.)
Part Clearance: 35"x6" (Aluminum Table Config.)
Overall Foot Print: 45"x48"x33"
Rapid Speeds(X,Y,Z): 100, 100, 100 ipm
Cut Speeds(X,Y,Z): 100, 100, 100 ipm
Resolution (X,Y, Z): 0.00035" , 0.00035" , 0.00035"
Repeatability : 0.001" (+/-)
Drive Mechanism: Acme Leadscrew and Anti-Backlash Nut
Weight: Est. 190 lbs
Shipping: 53"x53"x42" Wooden Crate Est. at 500 lbs
Guitar Inlay cutting on a VR-Series
It takes a very smooth and accurate machine to be able to use a 0.015" cutter. The VR Servies machines does the job very well! A Tekno Italian Spindle was used on the video above. Great for making guitar bodies, necks, and inlays.
Aluminum pocketing on a VR-Series
CNC Router model VR3636 Cutting aluminum 6061 0.050" step down, 500" deep pockets and .75" deep side walls. The machine is made of billet aluminum using 4 stepper motors driving 4 leadscrews. The cutting spindle is a Porter Cable 892. Read more...
Plastic cutting on a VR-Series
Cutting plastic with 3x3 cnc router machine. VELOX CNC model VR3636. Feed rate of the roughing was set to 45 IPM at .250" depth of cut, 20K RPM, .500" diameter cutter, 2 flute end mill. The finish pass was at 20IPM. Read more...
Deep wood cutting on a VR-Series
VELOX CNC 36x36 machine cutting 2x4 material, 30 IPM, 1.3" Deep. 3.2 minutes, .500" Amana cutter. We used Mach 3 and VisualMill 2012.
Carbonfiber and Fiberglass plate cutting on a VR-Series
VELOX CNC router cutting through .0625" thick carbon fiber/fiber glass material. Using a custom size machine 74x14. This is similar to our 4x4 and 2x2 machines. Porter Cable Router and a VELOX CNC brass collet adapter .250" step down to .125". Air clamps were used for the hold down. Read more...
Dovetail cutting on a VR-Series
VELOX CNC cutting dovetails. The pattern was revised after 1 or 2 tries and the fit was great on the 3rd try. For anyone making dovetails, this machine would provide a great solution to making different styles of dovetails. VR3636 machines, Mach 3 control software, porter cable 892, precision collet, and a dovetail bit was used to cut pine.
Available software for machine sold by VELOX CNC. VELOX CNC machines works with all standard G-codes.
Vectics Cut 3D
+ Demo Downloadable
+ Art CAD and Cam
Vectics Cut 2D
+ Demo Downloadable
+ Art CAD and Cam
Vectics Vcarve Pro
+ Demo Downloadable
+ Art CAD and Cam
Aspire
+ Demo Downloadable
+ Art CAD and Cam
VISUAL MILL
+ Demo Downloadable
+ CAD CAM
Rhino CAD - CAM
+ Demo Downloadable
+ Art CAD and CAM
Please call and speak to a VELOX rep for updated software listings.
Available software for machine sold by 3rd party.
VELOX CNC machines works with all standard G-codes.
Gibbs CAM
+ Parametric CAD
+ GibbsCAM will run on Mach 3
Solidworks
+ Parametric CAD
+ Solid CAM will run on MAch 3
Enroute
+ CAD - CAM
+ For the Cabinet and Sign industries
KCD
+ Cabinet Design
+ CAD
Bob CAM
+ CAM
Master CAM
+ CAD
+ CAM
Please call and speak to a VELOX rep for updated software listings.
Thick .75" columns mounted on 1" solid aluminum bearing transition blocks provides a solid gantry design. 3/4 thick table top have t-slots for 1/4-20 hex bolt or hex nuts.
Solid Billet 6061 aluminum parts bolted onto precision extruded aluminum. The supported 16 mm shafts are installed under the table to avoid falling dust. Cable carriers keep wires nice and neat.
At Velox CNC, we strive to make quality parts in-house using high tech cnc machines. The majority of the aluminum is machined and assembled in-house in Orange California. The table top is custom extruded for VELOX CNC. Almost all of our parts have a .020" bevel to give it a superior look and feel.