THE VR5050-X Currently Ships 4-6 weeks from date of deposit.
VR5050-X 3 Axis Motion Open Bed using 4 motors and 4 drivers.
50" x 50" CNC Router
Cut 48"x48" comfortably or a 4'x8' sheet with a little more work. Cut 2D composite or 3D wood relief with this 4' x 4' travel cnc router machine. The supported rails on the X and Y axis on this 48" x 48" cnc router provides rigidity, while the anti-backlash nuts provide high tolerance positioning, and cut accuracy. Dust resistance lead screws are very we suited for projects that produces a lot of powder, wood chips, and foam dust. The proven gecko drive and high torque stepper motors are great for business needs as well as personal use. Most of VELOX CNC machines configured with 110V control boxes have been used in home garages, businesses, and schools with little or no investment to power upgrades. VELOX CNC customer service and support is one of the best in the industry. Let our experience help you be successful.
Cutting carbon/fiberglass with .001" results. Great circles and bolt holes all made using a .125" carbide endmill.
Would have been better results with a precision collet kit.
VR3636 Cutting 6061-T6 aluminum with a 0.050" step down pass for a total depth of 0. 500" deep pockets and .75" depth cut on the outer side walls. We used a Porter Cable 892, a .250" 2 flute carbide endmill with the RPM set to 23,000. Visualmill was used as the CAM software.
VR3636 Cutting polycarbonate with a .500" diameter endmill. A 0.250" step down pass for a total depth of 0. 500" deep. We used a Bosch 1617, 2 flute carbide endmill with the RPM set to 20,000-23,000. 45IPM for roughing and 20IPM for finishing. Visualmill was used as the CAM software. 4 bridges were used to hold down the part. We would use a vacuum for better cut quality.
VR3636 Cutting wood with a .500" diameter endmill. A 0.34" step down pass for a total depth of 1.300" deep. We used a Bosch 1617, 2 flute straight carbide endmill with the RPM set to 20,000-23,000. 30iPM for all cuts. Visualmill was used as the CAM software.
VR3636 Cutting a 3D eagle out of wood with a .500" diameter ball endmill. We used a Bosch 1617, 2 flute straight carbide endmill with the RPM set to 20,000-23,000. 30iPM for all cuts. Vectric Cut 3D was used as the CAM software.
VELOX CNC cutting dovetails. The pattern was revised after 1 or 2 tries and the fit was great on the 3rd try. For anyone making dovetails, this machine would provide a great solution to making different styles of dovetails. VR3636 machines, Mach 3 control software, porter cable 892, precision collet, and a dovetail bit was used to cut pine.
VELOX CNC parts machined in house using todays high tech cnc milling and turning machines. We have just added a VF2SS in July 2013 and now have 6 cnc machines; 5 HAAS mills, one HAAS lathe, and one Ecoca lathe.
At Velox CNC, we strive to make quality parts in-house using high tech cnc machines. The majority of the aluminum is machined and assembled in-house in Orange California. The table top is custom extruded for VELOX CNC. Almost all of our parts have a .020" bevel to give it a superior look and feel.
Our VELOX CNC machines are fully assembled, calibrated, tested, cut tested, and shipped on a pallet or in a crate. The aluminum extrusions are machined to tolerance on our cnc machines.
Solid Billet 6061 aluminum parts bolted onto precision extruded aluminum. The supported 16 mm shafts are installed under the table to avoid falling dust. Cable carriers keep wires nice and neat.
Solid .75" Drop plates adds rigidity to the already rigid design. The Z axis provides superior accuracy other rack and pinion design. The anti-backlash nut results in quality finish passes.
A taller Z travel of 8 inches compiled with a 6 inch clearance allows for less or no manual router repositioning which translate to faster set time.
Thick .75" columns mounted on 1" solid aluminum bearing transition blocks provides a solid gantry design. 3/4 thick table top have t-slots for 1/4-20 hex bolt or hex nuts.
At VELOX CNC we know that being down is not a good thing. So the team at VELOX CNC is always committed to providing you the support that you desire. VELOX CNC support is one of the best providers of support because we care, are knowledgeable, are ready to get you cutting again.
