cnc_router_3x3_machine cnc_router_home_velox velox cnc custom machines

4x4_cnc_router_wood_plastic_carbon_fiber_plastic
Image above is of 36x36 cnc router.

 

  • Up to date software, hardware, and technology.
  • Free 4 hours of Training at VELOX CNC, online, email, or GoToMyPC.
  • Reliable and proven Gecko Drives.
  • Rigid supported rails on X and Y axis.
  • Accurate anti backlash motion and resolution.
  • Assembled and tested.

VR5025-X
3 Axis Motion Open Bed using 4 motors and 4 drivers.
4x4 cnc router.

Cut 2D composite or 3D wood relief with this foot cnc router machine. The supported X and Y axis on this 4x4 cnc router provide a rigidity, high tolerance positioning, and cut accuracy. Dust resistance lead screws are very we suited for projects that produces a lot of powder, wood chips, foam dust, and more dusty outcomes. With our 110V/220V control box using tnhe proven gecko drive and high torque stepper motors you can use this machine in your garage, warehouse, business, or school with little or no investment to power upgrades. Our anti backlash lead screws and nuts provides great resolutions and accuracy.

cnc_router_2x2_machine

MACHINE TRAVEL
50" X 25" x 8"
X AXIS
50"
Y AXIS
25"
Z AXIS
8" (CUSTOMIZABLE - CALL US)
POWER
110V - 220V
X AXIS CLEARANCE
60"
Z AXIS CLEARANCE
5.5" after .75" table installed.
LEADSCREW X
5/8"-8 WITH 2 STARTS (.250" TRAVEL PER TURN)
(2 QTY) LEADSCREW Y
5/8"-8 WITH 2 STARTS (.250" TRAVEL PER TURN)
LEADSCREW Z
1/2"-10 WITH 1 STARTS (.100" TRAVEL PER TURN)
CONTROL BOX
STEPPER - GECKO DRIVE
MOTOR X
570 OZ/IN - 100IPM
MOTOR Y, AND A
380 OZ/IN - 100IPM
MOTOR Z
280 OZ/IN - 100IPM
CONTROL SOFTWARE
MACH 3
CABLE CARRIERS
ALL AXIS
BED TYPE
OPEN BED - Y AXIS HAS EXTERNAL DRIVES.

Cutting carbon/fiberglass with .001" results. Great circles and bolt holes all made using a .125" carbide endmill.
Would have been better results with a precision collet kit.

 

 

VR3636 Cutting 6061-T6 aluminum with a 0.050" step down pass for a total depth of 0. 500" deep pockets and .75" depth cut on the outer side walls. We used a Porter Cable 892, a .250" 2 flute carbide endmill with the RPM set to 23,000. Visualmill was used as the CAM software.

 

VR3636 Cutting polycarbonate with a .500" diameter endmill. A 0.250" step down pass for a total depth of 0. 500" deep. We used a Bosch 1617, 2 flute carbide endmill with the RPM set to 20,000-23,000. 45IPM for roughing and 20IPM for finishing. Visualmill was used as the CAM software. 4 bridges were used to hold down the part. We would use a vacuum for better cut quality.

 

VR3636 Cutting wood with a .500" diameter endmill. A 0.34" step down pass for a total depth of 1.300" deep. We used a Bosch 1617, 2 flute straight carbide endmill with the RPM set to 20,000-23,000. 30iPM for all cuts. Visualmill was used as the CAM software.

 

VR3636 Cutting a 3D eagle out of wood with a .500" diameter ball endmill. We used a Bosch 1617, 2 flute straight carbide endmill with the RPM set to 20,000-23,000. 30iPM for all cuts. Vectric Cut 3D was used as the CAM software.

 

 

 

Recommended Options:

  • CAD/CAM software
  • Computer with Parallel Card configured for dedicated Mach 3.
  • Porter Cable 892 Router.
  • Aluminum Table Top
  • 4th Axis
  • Please allow a VELOX sales representative to assist with your cnc options. call 714-639-3639

 

 

desktop_cnc_router_veloxcnc

4x4_desktop_cnc_router_veloxcnc

4x4_cnc_router_veloxcnc

 

line

Applications:
MDF, Maple, Balsa, Corian, Circuit Board, Hard Wood, Plastic, non ferrous metals.
Special misting, tools, proper feed rate, proper technique required if used to cut aluminum.
line



Available router mounts
Trimmer router mounts

feature

Bosch Colt mounts
+ 35K max RPM, great for 1/8 bits.
+ Precision .0005" collect sold by VELOX CNC.






2-3 HP Router mounts

feature

Porter Cable 892 and 690
+ 3.5" diameter, 11" circumference.
+ VELOX recommends for 1/4 and 1/2 bits.


feature

Porter Cable 7518
+ 4.27" diameter.


feature

Bosch 1617EVS
+ 3.5"


feature

Hitachi M12VC
+ 3.27"



feature

Dewalt DW616
+ 3.5"


line
Available routers sold by VELOX CNC
Trimmer routers

feature

Bosch Colt mounts
+ 35K max RPM
+ Precision .0005" collect sold by VELOX CNC.



2 HP Router

feature

Porter Cable 892 and 690
+ 3.5" diameter, 11" circumference.
+ Precision .0005" collect sold by VELOX CNC.







line
Available software for machine sold by VELOX CNC.
VELOX CNC machines works with all standard G-codes.
CAD software (Computer Aided Design)

feature

RhinoCAD
+ Demo Downloadable
+ Parametric CAD
+ Art CAD with plug in RhinoArt


feature

VisualMill (Mecsoft)
+ Demo Downloadable
+ Use Visualmill for basic 2D and 3 D drawings.


feature

Vectics Carve
+ Demo Downloadable
+ Art CAD


feature

Vectics Cut 2D
+ Demo Downloadable
+ Art CAD


feature

Vectics Cut 3D
+ Demo Downloadable
+ Art CAD


feature

Vectics Aspire
+ Demo Downloadable
+ Art CAD


CAM (Computer Aided Machining)

feature

RhinoCam or VisualMill (Mecsoft)


feature

VisualMill (Mecsoft)


feature

Vectics Carve
+ Demo Downloadable
+ Art CAD


feature

Vectics Cut 2D
+ Demo Downloadable
+ Art CAD


feature

Vectics Cut 3D
+ Demo Downloadable
+ Art CAD


feature

Vectics Aspire
+ Demo Downloadable
+ Art CAD


feature

AlibreCam made by Mecsoft.


line
Available software for machine sold by 3rd party.
VELOX CNC machines works with all standard G-codes.
CAD software (Computer Aided Design)


feature

Alibre
+ Demo Downloadable
+ Parametric CAD


feature

MasterCam
+ Parametric CAD and Art


feature

ArtCam
+ Art CAD


feature

Type3


feature

KCDW Cabinet Software. Use Enroute for easy to use CAM.


feature

Enroute


feature

BobCAD-CAM


feature

Solidworks

CAM (Computer Aided Machining)


feature

AlibreCam made by Mecsoft.
+ Parametric and Art
CAM.


feature

MasterCam
+ Parametric and Art
CAM.


feature

ArtCam
+ Art type of CAM


feature

Type3


feature

Enroute


feature

Enroute


feature

BobCAD-CAM


feature

SolidCAM

line
Optional items for the this machine.

3D cutting tools
Table Top
ER25 collet with .500" diameter body

feature

Aluminum table top.
+ T-sloted for versatility.

feature

Colt precision collet.
+ Increase precision a run-out of . 003" or .005" to a .0005" run-out. Ground collets.

feature

Brass 1/8th inch collet holders.
+ Holds 1/8th bits with better accuracy compared to off the shelf adapters.





line

Assembly of Machine:
At VELOX CNC, we test the controller and tolerance prior to shipping the machine. It is important to us that our customers get up and running as soon as possible. You would just have to plug in the wires to the control box, connect the computer, and install the router onto the machine. We would be happy to be on the phone as you start up the machine.

Machine Warranty:
One year on parts based on an 8 hours per day, 7 days per week operation.
One year on labor at VELOX CNC location in California.

TRAINING:
4 hours of training one Mach 3 or Cam software sold by VELOX CNC with purchase of machine and control box.

Support on machine:
Email - unlimited.
Phone - unlimited.

Support on software:
Mach 3 - Unlimited only with purchase of machine, control box, and Mach 3.
Visualmill - 4 hours with purchase
. ($400 value)
Vectric - 4 hours of training with purchase ($400 value)

Crating and Handling:
The majority of the cnc machines are crated in a wooden pallet or a crate using plywood, 2x2 and 2x4. All machines are insured for the price you paid for the machine and are FOB Orange CA 92867.

Fork Lift:
A fork lift will be require unless otherwise stated in writing from VELOX CNC.

Lift Gate:
A lift gate may be available, but is not guaranteed. Please request a lift gate when you ask for a quote.

Shipping:
We use shipping brokers as well as UPS-SCS to ship your machine safely and on time.

Please contact us and provide your full address and shipping details so that provide you an accurate shipping charge.

 

line