cnc_router_machines_wood

     
home | about us | links |search | contact  
 
   
  NAVIGATION  

 

 

CONTACT US

1746 W. KATELLA AVE. SUITE 6
ORANGE CA 92867

Near the HONDA CENTER

Phone: 714-639-3639

Hours:
Mon-Fri
9am - 5pm


 

 



credit cards

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

Login Status  Login Status

Client login not enabled


 

 

 
PRODUCT DETAIL

3D CUTTING BITS » 3D BITS SOLD BY 10 PACK

 Checkout
CM404-0625-100B-10PAK
CM404-0625-100B-10PAK
Specifications
  • Geometry - 1/4 in. (6.35 mm) shank, tapered high-shear flutes, ball-nose tip
  • Length - 2.5in. (63.5mm) 0.010in.
  • Tip diameter - nominal 0.0005 in.
  • Taper angle - nominal 0.03°
  • Runout (TIR) - max 0.0002 in.
  • Max. depth of cut - nominal 0.005 in.
  • Anticipated Life - depends on material being cut (min 50,000 in, western red cedar)
  • Material - solid submicrograin carbide
  • Operating RPM - CNC certified operation 1k RPM to 40k RPM

Benefits

  • High-shear ball-nose tip cuts smooth 3D contours with reduced stepping, and minimal fuzzing
  • High flute volume supports high feed rates / chip loads
  • High aspect ratio for single pass deep-reach cutting
  • Optimized flute geometry and low TIR insures clean cutting, virtually eliminating sanding and fuzz removal
    (when used with low TIR spindles).

Applications

  • Dimensional signage
  • Precision 3D carving
  • 3D contouring and profiling
  • Cabinetry and furniture making
  • 3D millwork
  • Compatible with CarveWright and CompuCarve woodworking systems.

Application Data (tool description for CAM software)

  • Tool Type: Tapered Ball Nose
  • Shank Diameter = 0.250"
  • Half angle
    • 0.0313in. (1/32in.) dia. tip - 6.2°
    • 0.0625in. (1/16in.) dia. tip - 5.4°
    • 0.1250in. (1/8in.) dia. tip - 3.6°
    • 0.2498in. (1/4in.) dia. tip - 0.10°
  • Tip radius = nominal 0.001"
  • Stepdown = Depth per Pass, use 2 X tip diameter for roughing (clearance) and 0.10 X tip diameter for final cleanup
  • Depth of Cut (DOC) = 1.074"
  • Stepover (for final cleanup pass) = 0.10 X tip diameter
  • Stepover (for roughing, clearance pass) = 0.25 to 0.40 X tip diameter
  • Spindle RPM (SPEED) = 5 KRPM to 60 KRPM
  • Feedrate (IPM) = Depends on the material being cut. Do the Sweetspot Test before setting this parameter
  • Plunge rate = 10 IPM to 25 IPM (again depending on material being cut)
 
:
Email Friend
Price: $350.00
Please Call US

 
« Previous | Next »


       

VELOX CNC

Contact us
Video

Help & FAQ

Returns Policy

Shipping FAQ

Site Map

Sitemap.html
Sitemap.xml

Links

Pontech/Prolinear
Desktop CNC

Metal Fabrication

© Copyright www.VELOXCNC.com 2011-2014, LIBOON GROUP, INC.

Admin | PDF | IGES | Service | Jewlery Mill | XY Table | Mach 3 Computer Build | 3x3 | ATC | Woodcraft 3x3