cnc_router_3x3_machine cnc_router_home_velox velox cnc custom machines

atc_cnc_router_wood_3x3_4x4_2x2
THE VR2525 ATC Currently Ships 7-8 weeks from date of deposit.

VR2525-ATC
3 Axis Motion Open Bed using 4 motors and 4 drivers.
25" x 25" CNC Router

This small foot print precision automatic tool change cnc router is great for production. Cut 2D composite or 3D wood relief with this 25" x 25" travel cnc router machine. The supported rails on the X and Y axis on this 2x2 cnc router provides rigidity, while the anti-backlash nuts provide high tolerance positioning, and cut accuracy. Dust resistance lead screws are very we suited for projects that produces a lot of powder, wood chips, foam dust, and more dusty projects. The ultra quite Italian HSD spindle is 220V 3 phase. The hood is air powered and will lift up before a tool change. The machine is fitted with easy to access grease fittings for machine maintenance. The result of a well greased machine provides smooth accurate cuts while prolonging the life of the machine. 1" thick columns bolt on to 4 extruded aluminum pieces for the X gantry. 3 bearing block are used for each side of the Y bottom axis.

VELOX CNC customer service and support is one of the best in the industry. Let our experience help you be successful.

Call Today:714-639-3639

VIDEO | IMAGES | SPECIFICATIONS | DRAWINGS | ACCESSORIES | SOFTWARE | SUPPORT

Prices Start at $17,000


cnc_router_3d_velox_cnc

 

cnc_artcam_express cnc_artcam_express
y
 
VIDEOS VIDEO | IMAGES | SPECIFICATIONS | DRAWINGS | ACCESSORIES | SOFTWARE | SUPPORT

Cutting carbon/fiberglass with .001" results. Great circles and bolt holes all made using a .125" carbide endmill.
Would have been better results with a precision collet kit.

VR3636 Cutting 6061-T6 aluminum with a 0.050" step down pass for a total depth of 0. 500" deep pockets and .75" depth cut on the outer side walls. We used a Porter Cable 892, a .250" 2 flute carbide endmill with the RPM set to 23,000. Visualmill was used as the CAM software.

VR3636 Cutting polycarbonate with a .500" diameter endmill. A 0.250" step down pass for a total depth of 0. 500" deep. We used a Bosch 1617, 2 flute carbide endmill with the RPM set to 20,000-23,000. 45IPM for roughing and 20IPM for finishing. Visualmill was used as the CAM software. 4 bridges were used to hold down the part. We would use a vacuum for better cut quality.

VR3636 Cutting wood with a .500" diameter endmill. A 0.34" step down pass for a total depth of 1.300" deep. We used a Bosch 1617, 2 flute straight carbide endmill with the RPM set to 20,000-23,000. 30iPM for all cuts. Visualmill was used as the CAM software.

VR3636 Cutting a 3D eagle out of wood with a .500" diameter ball endmill. We used a Bosch 1617, 2 flute straight carbide endmill with the RPM set to 20,000-23,000. 30iPM for all cuts. Vectric Cut 3D was used as the CAM software. VELOX CNC cutting dovetails. The pattern was revised after 1 or 2 tries and the fit was great on the 3rd try. For anyone making dovetails, this machine would provide a great solution to making different styles of dovetails. VR3636 machines, Mach 3 control software, porter cable 892, precision collet, and a dovetail bit was used to cut pine.
 
VELOX CNC parts machined in house using todays high tech cnc milling and turning machines. We have just added a VF2SS in July 2013 and now have 6 cnc machines; 5 HAAS mills, one HAAS lathe, and one Ecoca lathe.  

 

 
IMAGES VIDEO | IMAGES | SPECIFICATIONS | DRAWINGS | ACCESSORIES | SOFTWARE | SUPPORT

cnc_router_part_veloxcnc

At Velox CNC, we strive to make quality parts in-house using high tech cnc machines. The majority of the aluminum is machined and assembled in-house in Orange California. The table top is custom extruded for VELOX CNC. Almost all of our parts have a .020" bevel to give it a superior look and feel.

cnc_router_plastic

Solid Billet 6061 aluminum parts bolted onto precision extruded aluminum. The supported 16 mm shafts are installed under the table to avoid falling dust. Cable carriers keep wires nice and neat.

cnc_router_machine

Thick 1.00" columns mounted on 1" solid aluminum bearing transition blocks that ride on 3 bearing blocks provides a solid gantry design. 3/4 thick table top have t-slots for 1/4-20 hex bolt or hex nuts.

 

 
SPECIFICATIONS VIDEO | IMAGES | SPECIFICATIONS | DRAWINGS | ACCESSORIES | SOFTWARE | SUPPORT
   

TRAVEL:   FOOT PRINT:  
-XYZ ROUTER CONFIG 27x27X8 (Table Top Router Config) click here for drawing. -XYZ Coming soon
-XYZ PLASMA CONFIG 25x25X8 (Table is removed, plasma open bed clearance)    
       
PART CLEARANCE:      
-WIDTH X HEIGHT Coming soon    
       
SHIPPING: A fork lift is required. SET THE MACHINE ON:  
-Pallet Coming soon -TABLE WIDTH X DEPTH Coming soon
-Crate Coming soon    
       
ELECTRICAL:   SOFTWARE: For the best performance, please have us supply the computer
-Computer 115V - 220V *Separate this from the router -Flash Cut Servo 4 Axis WIN 7 32 BIT
-Router 115V   2 GIGS OF RAM
-HSD ATC 220V - 3 Phase *If purchased with cnc   40 G HARD DRIVE
-Control Box 115V - 220V   17 INCH MONITOR
      USB
MOTORS:      
-XYA Coming soon -CAD PLEASE REFER TO THE CAD PRODUCT
-Z Coming soon -CAM PLEASE REFER TO THE CAM PRODUCT
       
MECHANICAL:   MECHANICAL:  
-Machine Frame Solid Aluminum 6061 CNC to spec -XY Leadscrew 5/8 Diameter - .250 per turn (Bottom has Dual)
-Machine Frame Aluminum Precision Extrusions CNC to spec. -Z Leadscrew 1/2 Diameter - .100 per turn
-Control Box Steel Sheet Metal Powder Coated -XYZ Cable Carriers Cable Management on all axis.
-Bearings XY 16mm Supported Precision Rails Recirculating Bearings -XYZ Ratio All Axis are Direct Drive - anti-backlash couplers.
-Bearings Z 20mm Precision Rails and Recirculating Bearings    
       
SPEED   CONTROL BOX:  
-X 100 IPM +-20 IPM Dependant on load/acceleration -DRIVERS Flashcut CNC
-Y 100 IPM +-20 IPM Dependant on load/acceleration    
-Z 60 IPM +-20 IPM Dependant on load/acceleration    
       
WARRANTY      
-MACHINE 1 year on defective parts. 1 year labor at VELOX CNC.    
 
All specifications may vary and change without notice.

 

 

 
DRAWINGS VIDEO | IMAGES | SPECIFICATIONS | DRAWINGS | ACCESSORIES | SOFTWARE | SUPPORT
   

Coming soon Coming soon

 

 

 

 
ACCESORIES VIDEO | IMAGES | SPECIFICATIONS | DRAWINGS | ACCESSORIES | SOFTWARE | SUPPORT

ACCESSORIES: Please call for details    
-Table Top Clamps 4 Clamps -Dust Hood Suck up the loose dust and ships with a dust hood
-Precision Collet Kit Get .0004 precision runout -Cold Air Gun Not available
       
-3D Tools Cut your carving projects with carbide 3D bits    
-End mills Cut 2D parts with flat tip end mills -Ball End Mills Cut bowl shapes with ball endmills
       

 

 

 

 

 

 
SOFTWARE VIDEO | IMAGES | SPECIFICATIONS | DRAWINGS | ACCESSORIES | SOFTWARE | SUPPORT


Available software for machine sold by VELOX CNC.
VELOX CNC machines works with all standard G-codes.
 
CAD software (Computer Aided Design)

feature

RhinoCAD
+ Demo Downloadable
+ Parametric CAD
+ Art CAD with plug in RhinoArt


feature

VisualMill (Mecsoft)
+ Demo Downloadable
+ Use Visualmill for basic 2D and 3 D drawings.


feature

Artcam Express
+ Demo Downloadable
+ Art CAD


feature

Vectics Carve
+ Demo Downloadable
+ Art CAD


feature

Vectics Cut 2D
+ Demo Downloadable
+ Art CAD


feature

Vectics Cut 3D
+ Demo Downloadable
+ Art CAD


feature

Vectics Aspire
+ Demo Downloadable
+ Art CAD


CAM (Computer Aided Machining)

feature

RhinoCam or VisualMill (Mecsoft)


feature

VisualMill (Mecsoft)


feature

Artcam Express
+ Demo Downloadable
+ Art CAD


feature

Vectics Carve
+ Demo Downloadable
+ Art CAD


feature

Vectics Cut 2D
+ Demo Downloadable
+ Art CAD


feature

Vectics Cut 3D
+ Demo Downloadable
+ Art CAD


feature

Vectics Aspire
+ Demo Downloadable
+ Art CAD


feature

AlibreCam made by Mecsoft.



Available software for machine sold by 3rd party.
VELOX CNC machines works with all standard G-codes.
 
CAD software (Computer Aided Design)


feature

Alibre
+ Demo Downloadable
+ Parametric CAD


feature

MasterCam
+ Parametric CAD and Art


feature

Artcam Insignia
+ Demo Downloadable
+ Art CAD


feature

ArtCam Pro
+ Art CAD


feature

Type3


feature

KCDW Cabinet Software. Use Enroute for easy to use CAM.


feature

Enroute


feature

BobCAD-CAM


feature

Solidworks

CAM (Computer Aided Machining)


feature

AlibreCam made by Mecsoft.
+ Parametric and Art
CAM.


feature

MasterCam
+ Parametric and Art
CAM.


feature

Artcam Insignia
+ Demo Downloadable
+ Art CAD


feature

ArtCam Pro
+ Art type of CAM


feature

Type3


feature

Enroute


feature

Enroute


feature

BobCAD-CAM


feature

SolidCAM

 

 

 

 
SUPPORT VIDEO | IMAGES | SPECIFICATIONS | DRAWINGS | ACCESSORIES | SOFTWARE | SUPPORT

At VELOX CNC we know that being down is not a good thing. So the team at VELOX CNC is always committed to providing you the support that you desire. VELOX CNC support is one of the best providers of support because we care, are knowledgeable, are ready to get you cutting again.

 

   
SUPPORT:   EXTENDED WARRANTY:  
-Email Click her to email us. -Phone Please call 714-639-3639 and ask our rep about how you can add additional warranty to your machine or what you need in your UP TIME KIT.
-Phone Please call 714-639-3639    
       

 

 

cnc_router_3d_velox_cnc